ETC Source Four LED Series Manuale Utente Scaricare il pdf (Pagina 31)

1 Installation and User Interface Overview 26

Safety Cable

A safety cable (or other approved safety device) should be attached to the fixture housing

and wrapped around the hanging structure (pipe). An appropriate attachment loop is

provided on the protruding tab of the fixture housing. Take care to leave as little slack as

possible in the safety cable to avoid the cable catching the yoke of the fixture.

Figure-1.12 Safety Cable Loop on Fixture Housing.

Fixture Weight

Total weight depends on how the individual fixture is configured.

Model

Weight

a) Does not include mounting hardware.

Shipping Weight

Lbs.Kg.Lbs.Kg.

With barrel 18.3 8.3 28 12.7

Without barrel 14.3 6.5 23 10.4

Safety cable

loop

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 95 96

User Manual 1
Table of Contents 3
Introduction 6
Daylight and Tungsten 7
Fixture Components 8
Introduction 4 9
Applications 10
Document Conventions 10
WARNING: 11
Contacts 12
Quick Start 13
Configure 14
Soft Focus Diffuser 14
Quick Setups Menu 15
Studio Quick Setup 16
Advanced Settings 16
Overview 17
Specifications 18
Typical Power Consumption 19
Note About LED Fixtures 19
Hardware 21
Install Lens Tube 22
Aim Adjustments 23
Focusing the Beam 24
Shaping the Beam 24
Accessory Slot 26
CAUTION: 27
Adjusting the Yoke Position 28
Installation Clearances 29
Safety Cable 31
Fixture Weight 31
Connections 33
DMX Profile 34
Color Mixes 35
Color Matching 37
Direct Control 38
Fan Control 38
Tungsten and Daylight 39
Lustr+ and Studio HD 39
Installing Accessories 40
Basic Menu Navigation 41
User Interface Overview 42
2 Basic Menu Navigation 38 43
Keypad Lockout 43
Lustr+ screen shown 44
Display Title 45
Input Settings 45
DMX Address 45
Menu Navigation 46
Operation 47
Home Screen Displays 48
3 Operation 44 49
Main Menu 50
Operation 46 51
Advanced Menu 52
Data Loss 54
HLL-2Min 54
HLL-4ever 54
Using Plus Seven Control 55
Regulated 56
Protected 56
Standard 57
Incandescent 57
Output Freq 59
Red Shift 59
3 Operation 56 61
Fade Time 62
Delay Time 63
[Enter]. To discard 63
Edit (Daylight and Tungsten) 64
Copy to Other Fixtures 64
Save DMX as Preset 64
Sequences 65
Link Time 67
Finishing the Sequence 68
Master/Slave Operation 69
Current DMX In 70
Network Statistics 71
Individual Control (Ind Cntl) 72
Recalibrate Fixture 73
About Fixture 73
Backlight 74
BLght time out 74
Language 75
Status Indicators 75
Operation 72 77
Studio Settings 78
3 Operation 74 79
Studio DMX Control 80
Error Messages 81
Software Updates 82
Routine Maintenance 83
Appendix A 86
Menu Flow Chart 86
System OK 87
Menu Flow Chart 84 89
To Sequences 90
Status: Active 92
To Recalibrate 93
To Te s t 93
Menu Flow Chart 90 95

Commenti su questo manuale

Nessun commento

ETC Source Four LED Series Manuale Utente Pagina 31

Commenti su questo manuale

Prodotti e manuali riguardandi Proiettori ETC Source Four LED Series