Etc Source Four LED v1.6.0 User Manual Manuale Utente Scaricare il pdf (Pagina 20)

14 Source Four LED Profile v1.6.0 User Manual

Focusing the Beam

Figure-1.4 Focusing the beam.

Step 1: Loosen the beam focus knob located under the barrel as shown in Figure-1.4.

Step 2: Slide the lens tube forward or backward to achieve the desired beam edge.

Step 3: Once the fixture is focused, tighten the beam focus knob.

Shaping the Beam

The beam can be shaped using the shutters (see Figure-1.1), a pattern, an optional drop-in iris, or

by rotating the barrel.

Pattern Projection

The pattern holder slot is on the top side of the barrel and in front of the shutters. It accommodates

A-size, B-size, and glass pattern holders.

Figure-1.5 Pattern holders.

Note:

Pattern projections generally look best when used with the included Soft Focus

diffuser.

Note:

Because the Source Four aperture is 3 inches wide, ETC recommends using A-size

patterns for maximum pattern effectiveness.

Beam focus knob

3.12" Diameter

3.70"

2.75" Diameter

3.70"

A-Size Pattern holder: holds 3”

diameter patterns

B-Size Pattern holder:

holds 2.5” and 2.75”

diameter patterns

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 99 100

Nessun commento

Etc Source Four LED v1.6.0 User Manual Manuale Utente Pagina 20