Etc Source Four LED v1.6.0 User Manual Manuale Utente Pagina 85
- Pagina / 100
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Quick Start 79
Quick Setups Menu
Various pre-programmed combinations of operational settings are available to quickly get
you started. These settings are specifically created for different situations and are easily
accessible on the fixture’s user interface. Individual settings within each quick setup can be
accessed via the Advanced menu in order to take advantage of all the possible control
features.
Quick Setups (Lustr+, Series 2 Lustr, and Studio HD)
Step 1: On the Main Menu, scroll to Quick Setups.
Step 2: Press [].
Step 3: Scroll to the desired setup and then press [].
An asterisk (*) next to the setup name indicates that setup is active.
Step 4: Press [] to return to the home screen.
The top line of the home screen displays the name of the active setup.
Quick Setup Description Profile Features
General
General lighting:
All-purpose settings for most lighting
applications.
The default setup for the Lustr+ and Lustr
2.
Direct
control
• Standard dimming curve
• Regulated output for brightness
consistency
• Individual color channels plus master
intensity control
• Allows for native color space
crossfades
• Output is NOT color-calibrated
Stage
Theatrical lighting:
Tungsten-like performance and precise
color-control.
Uses the most DMX channels of all quick
setups.
HSI
Plus 7
enabled
• Incandescent dimming curve
• Regulated output for brightness
consistency
• White point: 3200K
XT Arch
Longevity and reliability in applications
with limited access and extreme
environments.
High degree of output consistency and
protection against temperature swings.
HSI
• Standard dimming curve
• Protected output for high-heat
environments
• Reduced overall brightness
• White point: 3200K
High Impact
Concerts and High Impact lighting:
Enables quickest response, simple RGB
control and strobe channel for maximum
effect usage.
RGB
• Quick dimming response
• Boosted output for maximum intensity
• Reduced consistency of output
• White point: 5600K
Studio
Video or film lighting:
Enables quick, comprehensive control of
white light via DMX or the fixture’s
onboard user interface.
High-quality white-light output.
Studio
• Linear dimming curve
• Regulated output for brightness
consistency
• Variable white point 2700-6500K
• Variable + or – green (tint) with the
Lustr+, Series 2 Lustr, and Studio HD
The Studio Quick Setup is operational in
all fixtures for excellent white light
performance. It is the default setting for
Daylight, Tungsten and Studio HD
fixtures. In addition, Studio Quick Setup
enables stand-alone operation from the
User Interface on the back of the fixture if
no console is present.
For more information, see Studio
Settings, page 70.
- User Manual 1
- Table of Contents 3
- Chapter 2 4
- Chapter 3 4
- Appendix A 5
- Appendix B 5
- Introduction 7
- Daylight and Tungsten 8
- Fixture Components 9
- Applications 10
- Document Conventions 10
- WARNING: 11
- Contacts 12
- Chapter 1 13
- Specifications 14
- Typical Power Consumption 15
- Note About LED Fixtures 16
- Hardware 17
- Install Lens Tube 18
- Aim Adjustments 19
- Focusing the Beam 20
- Shaping the Beam 20
- Soft Focus Diffuser 21
- CAUTION: 23
- Adjusting the Yoke Position 24
- Installation Clearances 25
- Safety Cable 27
- Fixture Weight 27
- Connections 29
- DMX Profile 30
- Color Mixes 31
- HSI and HSIC: 31
- Color Matching 33
- Direct Control 34
- Fan Control 34
- Tungsten and Daylight 35
- Installing Accessories 36
- Basic Menu Navigation 37
- User Interface Overview 38
- 2 Basic Menu Navigation 33 39
- Keypad Lockout 39
- Lustr+ screen shown 40
- Display Title 41
- Input Settings 41
- DMX Address 41
- Menu Navigation 42
- Operation 43
- Home Screen Displays 44
- 3 Operation 39 45
- Main Menu 46
- Operation 41 47
- Advanced Menu 48
- Data Loss 50
- HLL-2Min 50
- HLL-4ever 50
- Using Plus Seven Control 51
- Regulated 52
- Protected 52
- Standard 53
- Incandescent 53
- Output Freq 55
- Red Shift 55
- Operation 51 57
- Fade Time 58
- Delay Time 58
- []. To discard 59
- Edit (Daylight and Tungsten) 60
- Copy to Other Fixtures 60
- Save DMX as Preset 61
- Sequences 62
- Operation 57 63
- Link Time 64
- Finishing the Sequence 64
- Master/Slave Operation 66
- Current DMX In 67
- Network Statistics 68
- Operation 63 69
- Individual Control (Ind Cntl) 70
- Recalibrate Fixture 71
- About Fixture 71
- Backlight 72
- BLght time out 72
- Language 73
- Status Indicators 73
- Operation 69 75
- Studio Settings 76
- 3 Operation 71 77
- Studio DMX Control 78
- Error Messages 79
- Software Updates 80
- Routine Maintenance 81
- Quick Start 83
- Configure 84
- Quick Setups Menu 85
- Studio Quick Setup 86
- Advanced Settings 86
- Menu Flow Chart 87
- System OK 88
- Menu Flow Chart 83 89
- Menu Flow Chart 85 91
- Press the Light Bulb button 93
- Lustr+ and Studio HD xtures 93
- To Te s t 94
- To Recalibrate 94
- Menu Flow Chart 89 95
- B Menu Flow Chart 91 97
Prodotti e manuali riguardandi Illuminazione Etc Source Four LED v1.6.0 User Manual
(1 pagine)
(100 pagine)
(7 pagine)© 2020, manymanuals.it. Tutti i diritti riservati | 0.100 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale